Mold is the mother of industry. It is precisely because of the existence of molds that goods can be copied and produced in large quantities. Injection molds have become a part of the wider application range in the field of molds. Injection mold factories need to be involved in the process of producing injection molds. A set of injection molds can finally be manufactured and produced with various types of precision equipment. So what equipment does a general injection mold factory have?
Milling machine: a machine tool that uses a milling cutter to process a variety of surfaces on a workpiece; a milling machine can mill, drill, and boring the workpiece.
Drilling machine: a machine tool that uses a drill bit to process holes on the workpiece. The drilling machine has a simple structure and relatively low machining accuracy. It can drill through holes and blind holes, replace special tools, and can expand, counter-hole, ream or tapping.
Lathe: A machine tool that uses a turning tool to turn a rotating workpiece.Drills, reamers, reamers, taps, dies and knurling tools can also be used on the lathe for corresponding processing.
Large water mill: Use the grinding wheel to rotate and grind the workpiece to achieve the required flatness. According to the shape of the table, it can be divided into two types: rectangular table and round table. The main parameters of the rectangular table surface grinder are the width and length of the table. , The main parameter of the round table surface grinder is the table diameter.According to the different types of shafts, it can be divided into horizontal shaft and vertical shaft grinders.Due to the large amount of heat generated during the working process, a large amount of coolant (usually water, sometimes oil) is used, so it has been awarded the title of large water grinder.
CNC machining center: CNC machining center is a CNC machine tool controlled by a CNC system. It can process very complex and difficult workpieces. It can’t be compared with ordinary machine tools. Moreover, the effect of machining workpieces is very good and the efficiency is very high. All operations can be completed after the workpiece is clamped once, because the CNC machining center has its own tool magazine, which can complete automatic tool change.
EDM: EDM (abbreviated as EDM, full name Electrical Discharge Machining) is a kind of machining equipment, mainly used for EDM.It is widely used in the manufacture of various metal molds and mechanical equipment.It is a special processing method that uses the electro-corrosion effect generated during the pulse discharge between the two electrodes immersed in the working fluid to etch away conductive materials, also known as electrical discharge machining or electro-erosion machining.
Wire cutting: Wire Electrical Discharge Machining (WEDM), which belongs to the category of electrical machining, was discovered by the former Soviet Union Razalianke and his wife when they studied the phenomenon and causes of switch contacts damaged by spark discharge corrosion. The instantaneous high temperature can cause the local metal to melt, oxidize and be corroded away, thus pioneering and inventing the electric discharge machining method.The wire cutting machine was also invented in the former Soviet Union in 1960. my country was the first country to be used in industrial production.
Link to this article：What are the production equipment of the injection mold factory?